logo

Dettagli dei prodotti

Created with Pixso. Casa. Created with Pixso. prodotti Created with Pixso.
ESP Controller
Created with Pixso.

IC693MDL940 output module , voltage range of 5V to 30V DC , frequency range of 50Hz to 60Hz

IC693MDL940 output module , voltage range of 5V to 30V DC , frequency range of 50Hz to 60Hz

Marchio: GE
Numero di modello: IC693MDL940
MOQ: 1
prezzo: Negotiations
Informazioni dettagliate
Luogo di origine:
IC693MDL940
Tipo di prodotto:
Modulo di uscita del relè
Voltaggio:
120/240 Volt AC
Relè:
2 amp
Temperatura:
0-60 gradi Celsius
Isolamento:
1500 volt
Carico massimo:
4 amp massimi
Risposta inserita/disinserita:
15 millisecondi
Consumo di energia iniziale:
7 milliampère
Imballaggi particolari:
Nuova scatola originale
Evidenziare:

IC693MDL940 output module 5V-30V DC

,

ESP controller output module 50Hz-60Hz

,

IC693MDL940 DC output module with warranty

Descrizione del prodotto
IC693MDL940 Output Module
Voltage range of 5V to 30V DC, frequency range of 50Hz to 60Hz
Technical Specifications
Specification Details
Rated Voltage 24 volts DC, 120/240 VAC (nominal - see the following table for exceptions)
Operating Voltage 5 to 30 volts DC 5 to 250 VAC, 50/60 Hz
Outputs per Module 16 (four groups of four outputs each)
Isolation: Field to Backplane and to Frame Ground 250 VAC continuous; 1500 VAC for 1 minute
Isolation: Point to Point 250 VAC continuous; 1500 VAC for 1 minute
Maximum Load 2 Amps pilot duty maximum per output
4 Amps maximum per common
16 amps maximum per module
Minimum Load 10mA
Maximum Inrush 5 Amps
On Response Time 15ms maximum
Off Response Time 15ms maximum
Power Consumption, all outputs on 7mA from 5 volt bus on backplane
135mA from relay 24V bus on backplane
When this module is used with DC power supply IC695PSD040 or PSD140, special precautions should be taken because dropouts in the source voltage will be seen by this module and may cause relay dropouts.
Product Overview
The IC693MDL940 module is a GE Fanuc manufactured relay output module. It is a 16-point output module variant with a voltage rating of 120/240 Volts AC. This Series 90-30 module is used for controlling output loads with an output switching capacity of 2 Amps of relay current.
Key Features
  • 4 groups of 4 output points each with common power output terminals
  • Controls various load devices including solenoids, indicators, and motor starters
  • Handles 15 bits of output data from the host controller CPU
  • Configurable using Proficy Machine Edition configuration software
  • Relay circuit powered through backplane with 24 Volts DC source
  • Compact size with small footprint
  • 1500 Volts isolation between field side and logic side
  • 500 Volts isolation between groups
  • Operating temperature should not exceed 60°C
IC693MDL940 output module , voltage range of 5V to 30V DC , frequency range of 50Hz to 60Hz 0 IC693MDL940 output module , voltage range of 5V to 30V DC , frequency range of 50Hz to 60Hz 1